GreenFiber Attic Insulation Nationwide

GreenFiber Attic Insulation: The Austin Owner’s Guide

We stock and install GreenFiber attic insulation throughout Austin, and most full-attic installs run between $1,400 and $3,800 depending on square footage and the R-value your home needs. Same-day and next-day appointments are available in most Austin zip codes, and our trucks carry GreenFiber Sanctuary and CellulosePro lines so we’re not ordering and waiting. Most homeowners figure out their attic insulation is failing the uncomfortable way: upstairs rooms bake in July, the AC runs nonstop, and the electric bill stops making sense.

Call (361) 321-0817

The good news is you don’t need to know exactly what’s up there now. Chase Whitaker and our crew have pulled failed GreenFiber out of attics from Mueller to Round Rock, and we can tell you within the first ten minutes of looking whether you need a top-off, a full replacement, or something else entirely.

Which GreenFiber Models This Applies To

GreenFiber makes two product lines that show up in Austin attics: the Sanctuary series (their R-60 and R-30 stabilized cellulose, often used in new construction) and the CellulosePro loose-fill line that’s popular with DIY retrofits and older homes. Both are blown-in cellulose, and both settle over time. That matters because a Sanctuary attic installed at R-60 in 2015 is not R-60 today.

Identifying what’s up there is straightforward: look for the GreenFiber bag tag stapled near the attic hatch, or check the blown material itself. GreenFiber cellulose has a distinctive gray-brown, almost confetti texture from the recycled paper content and fire-retardant treatment. If you’re not sure, take a photo and text it to us. We’ll match it before we quote anything.

One compatibility gotcha worth knowing: GreenFiber is NOT a simple top-off product. If your existing insulation has rodent damage, water staining, or is compressed below half its original depth, adding more on top of it locks the problem in. We’ll tell you whether you need removal first, and that’s not an upsell, it’s just how blown cellulose works in Austin’s humidity.

Signs Your GreenFiber Attic Insulation Is Failing

• Upstairs rooms run 8 – 12°F hotter than downstairs. Blown cellulose loses loft as it settles, and even a 20% depth reduction cuts its R-value noticeably. We see this constantly in two-story Austin homes from the early 2000s.
• Your HVAC runs more than it used to. When attic insulation underperforms, your AC fights heat gain through the ceiling all day. The fix is usually adding or replacing GreenFiber, not buying a bigger unit.
• You can see the ceiling joists. Most GreenFiber installs cover the joists completely. Bare joists mean the insulation has settled or was never deep enough in the first place.
• Utility bills are up 15 – 25% over last year. Austin Energy rates change, but a jump this size usually points to insulation that’s no longer doing its job.
• Drafty or dust-filled rooms near the attic access. Cellulose that’s broken down or shifted leaves gaps where conditioned air escapes. You’ll feel it before you see it.

Replacement Cost & What’s Included

In Austin, a GreenFiber attic insulation replacement typically runs $1,400 – $3,800. The main cost drivers are square footage, whether the old insulation needs removal first, and your target R-value. Austin is in Climate Zone 2, so most homes need R-30 to R-38, while newer builds or additions sometimes spec R-49 or R-60.

Every quote includes the full breakdown: material cost, labor, removal if needed, and access setup. You’ll get a written price before we touch anything. The work itself carries our 365-Day Done Right Promise, and if the insulation doesn’t perform the way it should within that year, we come back and make it right. That’s in writing, not just conversation.

Tell me your square footage and I’ll give you a real number – no runaround.

DIY or Call Us?

You can safely check the depth of your existing insulation with a ruler or tape measure: if it’s under 10 inches for R-30 or under 14 inches for R-38, you’re under-insulated. You can also safely look for water stains, rodent activity, or gaps around the attic hatch. These observations help you understand whether you need us at all.

What we don’t recommend is running a rental blower and installing GreenFiber yourself without the right training. Getting R-value right means hitting consistent density, and inconsistent blown cellulose leaves gaps you can’t see but will absolutely feel come August. We also handle vacuum removal of old cellulose, which is dusty, tight work that’s better left to a crew with the right equipment. If you’re on the fence, call (361) 321-0817 and we’ll walk you through what you’re working with before you spend anything.

FAQs