Insulation Company in Austin, TX
Insulation in Austin has to fight heat first. A poorly insulated attic here doesn’t just make upstairs rooms uncomfortable in August; it drives ceiling temperatures past 130°F and forces your AC to run almost constantly. Laurel Attic Insulation handles the full range: attic insulation, spray foam, and removal. Every job starts with a written price, and our crews know exactly what Austin’s 1970s-through-2000s housing stock needs. If you’re wondering whether your attic is under-insulated, call (361) 321-0817 and we’ll walk you through what we look for.
Why Austin Homes Are Different
Austin’s growth spurt from the 1970s through the early 2000s left a specific signature: ranch-style and two-story single-family homes built fast, often with R-11 to R-19 fiberglass batts and almost no attention to air sealing. That was the code minimum back then, and it’s nowhere near what a Texas attic needs. Newer homes in Austin fall under IECC 2015 or later, which requires noticeably higher attic insulation levels, so the gap between an older home and a newer one is stark.
The climate is the other half of the picture. Triple-digit summer days are routine, and humidity makes heat gain the dominant problem rather than heat loss. Radiant barriers and attic ventilation upgrades are common add-ons here because they directly attack the August ceiling-heat problem. And in older east Austin bungalows, we frequently find original blown-in rock wool or shredded paper insulation that has settled to R-5 or less. That’s effectively no insulation at all by modern standards.
Our Main Austin Services
Austin homeowners call us most about two things: bringing old attics up to modern R-value, and replacing insulation that’s wet, pest-damaged, or simply gone. Here’s how each service works here.
Attic Insulation in Austin
Most Austin attics we see are running R-11 to R-19 when they should be R-38 to R-60. That gap is why second floors bake in July. We install blown-in fiberglass and cellulose, and we pair it with air sealing around top plates, can lights, and attic hatches so the insulation actually does its job. In homes built before 2000, the air sealing is often the bigger payoff than the insulation itself. Attic Insulation in Austin covers specific materials, R-value targets, and local code requirements.
Spray Foam Insulation in Austin
Spray foam earns its keep in Austin because it air-seals while it insulates. In a vented attic, open-cell foam on the roofline cuts radiant heat transfer dramatically, and in unvented attics it brings the ductwork inside the conditioned envelope. That matters here because AC ducts in 140°F attics lose a measurable chunk of their cooling before air ever reaches a bedroom. We carry Icynene and Demilec open- and closed-cell lines. Spray Foam Insulation in Austin details open-cell vs closed-cell for this climate.
Insulation Removal in Austin
Old insulation in Austin isn’t just underperforming; it’s often holding moisture, rodent droppings, or decades of dust. We remove settled fiberglass, rock wool, and shredded paper insulation, then prep the attic for fresh material. The east Austin bungalows with original blown-in rock wool are a prime example: that stuff predates modern vapor barriers and often tests below R-5. Full removal and replacement is the only real fix. Insulation Removal in Austin covers the process, timeline, and what to expect during the job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Austin
We install Owens Corning fiberglass, Rockwool mineral wool, and Knauf blown-in insulation in Austin attics every week. Parts and material are stocked locally, so most jobs don’t wait on a warehouse shipment. See our brands for the full lineup and what we recommend for different house types.
Pricing for Insulation Company in Austin, TX
| Service | Typical range in Austin |
|---|---|
| Attic air sealing | $700 – $1,400 |
| Blown-in attic insulation | $1,100 – $2,800 |
| Attic insulation + air sealing | $1,800 – $4,200 |
| Spray foam attic (open-cell) | $2,200 – $5,500 |
| Spray foam attic (closed-cell) | $3,800 – $8,500 |
| Insulation removal | $900 – $2,400 |
| Insulation removal + replacement | $2,000 – $5,200 |
| Attic radiant barrier | $650 – $1,500 |
Two things push price up in Austin: older homes with limited attic access or settled material that needs more removal time, and the square footage of the attic floor itself. Every job gets a written price before any work starts, loaded through our online booking flow or by phone. No one adds a surprise line item at the door.
Neighborhoods We Serve in Austin
We work across the city, from the older bungalow pockets in east Austin to the two-story suburban builds of the 1990s and 2000s south and north. Most Austin jobs are scheduled within a few days, and we keep a same-week window for emergency removal work.
- East Austin (78702, 78721)
- Hyde Park and North Loop
- Circle C and Shady Hollow
- Mueller and Windsor Park
- South Congress, Travis Heights, and Bouldin Creek
Service Area – Cities Near Austin
Our Austin crews also run jobs in the surrounding metro. Here’s where we work beyond the city limits:
Pflugerville, TX, Manor, TX, Buda, TX, and Taylor, TX. Dispatch and scheduling are coordinated from Laurel’s Austin office, so the same team that quotes your job is the one showing up to do it.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Austin
Most Austin insulation jobs can be scheduled within three to five days. Emergency removal, like after a roof leak or animal infestation, can often be handled same-week. Call (361) 321-0817 and we’ll give you a real arrival window, not a four-hour range.
Adding blown-in insulation or spray foam to an existing attic generally doesn’t require a city permit in Austin, but some HOA communities in areas like Mueller or Circle C may have guidelines. We’ll flag any concerns during the quote. Call (361) 321-0817 for a free estimate and we’ll walk through it.
Yes. Attic insulation has a compounding benefit here because the cooling load drops immediately and keeps paying every summer after. Most Austin homeowners see the biggest comfort change within the first week. Call (361) 321-0817 and we’ll assess what your specific attic needs.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Austin Customers Say
"Booked a quote online and got a text when the crew was on its way. Blown-in insulation went in quickly and they sent before and after photos."
- Ron D."Spray foam in the crawl space. Floors feel warmer."
- Joanna S."Solid install. A little mess in the hall that was cleaned up when I mentioned it."
- Amelia T.